presto wood filler (with hardener), dark brown, 250g can

presto wood filler "styrene-free" is a two-component repair filler.

7,94 €
31,75 € per 1 kg
incl. 19% VAT , plus shipping costs
1 pcs In stock

presto wood filler "styrene-free" is a two-component repair filler. With presto “styrene-free” wood filler, small and medium-sized areas of damage on wooden surfaces can be permanently repaired. The colored filler evens out holes and deep scratches in all types of Wood.


  • Easy processing
  • High elasticity
  • Good adhesion
  • Easy to sand, even after a long time
  • Resistant to weak acids, weak alkalis; Propellants, solvents, water and de-icing salts


  • Base: polyester resin with mineral fillers
  • Color: brown, dark brown, light brown
  • Odor: characteristic
  • Form: soft, thixotropic
  • Processing time at 20°C: approx. 7 – 8 minutes.
  • Processing temperature: from 12°C
  • Drying (at 20°C, 50% relative humidity):
    • Can be sanded after: approx. 30 – 40 minutes
  • Flash point:
    • approx. 33°C (spatula); Not applicable for hardeners
  • Density at 20°C:
    • Filler 1.85 g/cm³
    • Hardener 1.15 g/cm³
  • Addition of hardener: 2 - 4% (optimal mixture 2.5%)
  • Temperature resistance of the cured material: 120°C
  • Shelf life/storage:
    • 18 months if stored properly (=10°C - 25°C, relative humidity of max. 60%) in the original closed container. Protect from direct sunlight, frost and moisture.
  • Container:
    • Fillers: narrow ring cans, 250 g
    • Hardener: plastic tubes


Environmentally friendly: European Aerosols strives to use formulations without regulated or questionable ingredients, with the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle empty containers. Dispose of drums and remnants at hazardous or special waste collection points. Only for DE: In order to ensure a high reuse and recycle rate, the legislature requires, in accordance with §15 - VerpackG, paragraph 1, the return of transport, sales or outer packaging, but alternatively, different agreements can also be made.

Labeling: All European Aerosols products comply with the current status of labeling regulations. The classification, classification and award are carried out in accordance with GHS or CLP 1272/2008/EC in the currently valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in the currently valid form.


Always read and observe the warning texts carefully before use!


  • The surface to be filled should be rust-free, clean, dry, free of grease and sanded.
  • Remove the required amount of material from the package and mix well with the appropriate amount of hardener (For one work step, we recommend: mix approximately a walnut-sized amount of filler and a pea-sized amount of hardener paste.).
  • Apply the mixed material in the desired layer thickness. After about 30-40 minutes, the filled surface can be drilled, sanded, sawed, filed, primed and painted.
  • Clean tools immediately after use, if necessary wash with nitro thinner.
  • Do not return mixed material to the can.

Color                             product               container   item number
 Presto wood filler dark        250 g   443534
 Presto wood filler light        250 g   443480
 Presto wood filler medium  250 g   443503


Write the first review for this item and help others make a purchase decision!:

Question about item
Contact data
Question about item

(* = Mandatory fields)

Please see our Privacy Policy

Technical Info
presto Holzspachtel (mit Härter) PDF Sicherheitsdatenblatt
Loading ...