Divinol Surface Premium

Solvent-containing release agent for fair-faced concrete in quality SB 3, SB 4. Also for coloured concrete

PRODUCT DESCRIPTION:

• Concrete Release agent for high quality fair-faced concrete (SB3, SB4)
• on the basis of dearomatized solvent
• prevents pores and shrink holes
• high surface quality

APPLICATION:

Divinol Surface Premium is a concrete release agent for high-quality exposed concrete surfaces that is also suitable for colored types of concrete. Divinol Surface Premium is primarily used in prefabricated parts factories, but can also be used in civil engineering.

The product is suitable for all absorbent and nonabsorbent formwork, especially for all-plastic, plastic-coated and phenolic resin formwork. If applicable safety principles and regulations are observed, use on heated and non-heated steel formwork is possible.

When used correctly, further treatment of the concrete surface (plaster, ceramics, wallpaper, paint) is not negatively affected. Divinol Surface Premium is to be applied as delivered by spraying, brushing or rolling. The low flash point must be taken into account here.

Divinol Surface Premium should be applied as delivered, preferably by spraying. The low flash point must be taken into account here.

STORAGE:

Recommended storage temperature: +5 °C up to max. +40 °C. Protect from strong sunlight. Store opened containers closed. Shelf life of at least 3 years if stored properly

NOTE / ATTENTION:

Close packages after use to prevent evaporation of solvents and to prevent the entry of dirt.

The product must not come into contact with galvanized materials or zinc.

MISCELLANEOUS

Consumption:

Depending on the type of formwork (absorbent, non-absorbent) approx. 20 g/m².

Processing:

The formwork must be pre-cleaned and dry. Divinol Surface Premium is sprayed evenly and thinly with a highpressure sprayer at 4-6 bar. Avoid accumulation of release agents. Concrete can be poured immediately after spraying.