Divinol SYN BE Plus

A solvent-free, non-water-miscible release agent for all common types of moulds, awarded with the Blue Angel (RAL-UZ 178) and the EU-Ecolabel

PRODUCT DESCRIPTION:

• non-watermiscible concrete release agent
• solvent-free, mineral oil free
• based on renewable resources
• no discolouration of the concrete surface
• economic consumption
• easily biodegradable
• free from labeling
• awarded with the environmental label "Blue Angel" RAL-UZ 178 and the EU Ecolabel license no.DE/027/2688

APPROVAL:

As part of a DGNB certification, Divinol SYN BE Plus can be used for quality levels 1 to 3 (according to the catalog of criteria ENV 1.2 - risks to the local environment).

APPLICATION:

Divinol SYN BE Plus can be used for all common types of formwork in civil engineering: for non-absorbent or less absorbent formwork (phenolic resin formwork facing) as well as for all-plastic and plastic coated formworks. Use on heated formworks is possible.

The product is very suitable as mixer protection.

Divinol SYN BE Plus be applied in the state at time of delivery by spraying, brushing or rolling without any problems. If used properly Divinol SYN BE Plus does not influence negatively the subsequent treatment of the concrete surface (plastering, ceramics, wallpaper, paint).

STORAGE:

Divinol SYN BE Plus is not sensitive to frost and can be applied in all kinds of weather conditions. Protect from strong sunlight. Store opened containers closed. If stored properly, it will last for at least 3 years.

MISCELLANEOUS

Consumption:

Depending on the type of formwork (absorbent, non-absorbent) approx. 8-30 g/m².

Processing:

The formwork must be pre-cleaned and dry. Divinol SYN BE Plus is sprayed evenly and thinly with a highpressure sprayer at 4-6 bar. Avoid accumulation of release agents. Concrete can be poured immediately after spraying.