High-quality release agent for exposed concrete parts in precast factories with additional corrosion protection
PRODUCT DESCRIPTION:
- Concrete release agent for high-quality fair-faced concrete parts
- based on dearomatized solvents
- reduces pores and shrink holes
- high surface quality
- high corrosion protection
APPLICATION:
Divinol Surface Premium KS is a concrete release agent for pre-cast factories. This product can be used for high quality fair-faced concrete surfaces, as well as self-compacting and colored concretes.
Divinol Surface Premium KS is especially suitable for heated and unheated steel formworks, as well as for all absorbent and non-absorbent formwork.
Divinol Surface Premium KS is preferably used as delivered by spraying. Please consider low flash point.
STORAGE:
Recommended storage temperature: +5 °C up to max. +40 °C. Protect from strong sunlight. Store opened containers closed. If stored properly, it will last for at least 3 years.
NOTE / ATTENTION:
Close packing after withdrawl to avoid evaporation of the solvent parts and to protect it from soilings!
Contact of the product with zinc-coated materials or zinc must be avoided.
MISCELLANEOUS
Consumption:
Depending on the type of formwork (absorbent, non-absorbent) approx. 5-20 g/m².
Processing:
The formwork must be pre-cleaned and dry. Divinol Surface Premium KS is sprayed evenly and thinly with a high-pressure sprayer or with automatic spray systems at 4-6 bar. Avoid accumulation of release agents. Concrete can be poured immediately after spraying.
- Applied in: Release agent for concrete
- brand: Divinol
- variety: Contains solvents
- hazard pictograms: GHS02: FlameGHS07: Exclamation markGHS08: Health hazard
- dangers_danger warnings: H412EUH 066H226H304H336
- dangers_safety instructions: P102P210P261P273P331P301 + P310
- danger_signal word: Danger.
- danger_component: Hydrocarbonsn-alkanesCycloalkanesIsoalkaneless than 2% aromatics
- Content: 25,00 l