presto wood filler "styrene-free" is a two-component repair filler. With presto “styrene-free” wood filler, small and medium-sized areas of damage on wooden surfaces can be permanently repaired. The colored filler evens out holes and deep scratches in all types of Wood.
QUALITY AND FEATURES:
- Easy processing
- High elasticity
- Good adhesion
- Easy to sand, even after a long time
- Resistant to weak acids, weak alkalis; Propellants, solvents, water and de-icing salts
PHYSICAL AND CHEMICAL DATA:
- Base: polyester resin with mineral fillers
- Color: brown, dark brown, light brown
- Odor: characteristic
- Form: soft, thixotropic
- Processing time at 20°C: approx. 7 – 8 minutes.
- Processing temperature: from 12°C
-
Drying (at 20°C, 50% relative humidity):
- Can be sanded after: approx. 30 – 40 minutes
-
Flash point:
- approx. 33°C (spatula); Not applicable for hardeners
-
Density at 20°C:
- Filler 1.85 g/cm³
- Hardener 1.15 g/cm³
- Addition of hardener: 2 - 4% (optimal mixture 2.5%)
- Temperature resistance of the cured material: 120°C
-
Shelf life/storage:
- 18 months if stored properly (=10°C - 25°C, relative humidity of max. 60%) in the original closed container. Protect from direct sunlight, frost and moisture.
-
Container:
- Fillers: narrow ring cans, 250 g
- Hardener: plastic tubes
ENVIRONMENT AND LABELING:
Environmentally friendly: European Aerosols strives to use formulations without regulated or questionable ingredients, with the best possible performance. The tops and packing are made out of recycled material.
Disposal: Please only recycle empty containers. Dispose of drums and remnants at hazardous or special waste collection points. Only for DE: In order to ensure a high reuse and recycle rate, the legislature requires, in accordance with §15 - VerpackG, paragraph 1, the return of transport, sales or outer packaging, but alternatively, different agreements can also be made.
Labeling: All European Aerosols products comply with the current status of labeling regulations. The classification, classification and award are carried out in accordance with GHS or CLP 1272/2008/EC in the currently valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in the currently valid form.
INSTRUCTIONS FOR USE:
Always read and observe the warning texts carefully before use!
Application:
- The surface to be filled should be rust-free, clean, dry, free of grease and sanded.
- Remove the required amount of material from the package and mix well with the appropriate amount of hardener (For one work step, we recommend: mix approximately a walnut-sized amount of filler and a pea-sized amount of hardener paste.).
- Apply the mixed material in the desired layer thickness. After about 30-40 minutes, the filled surface can be drilled, sanded, sawed, filed, primed and painted.
- Clean tools immediately after use, if necessary wash with nitro thinner.
- Do not return mixed material to the can.
Color product container item number
Presto wood filler dark 250 g 443534
Presto wood filler light 250 g 443480
Presto wood filler medium 250 g 443503
- brand: Presto
- hazard pictograms: GHS02: FlameGHS07: Exclamation mark
- dangers_danger warnings: H226H315H319H412EUH 208
- dangers_safety instructions: P271P280P337 + P313P403 + P233P501P101P102P210
- danger_signal word: Danger
- Shipping weight: 0,25 kg
- Content: 250,00 g