Filters and sort order
35 Items
under categorie
- Accesories
- Care
- Cleaners and sugar dissolving oils
- Fluid grease
- Gear oil
- Graphite grease
- grease
- Heat transfer oil
- High pressure greases
- High speed greases
- High temperature greases
- Hydraulic oil
- Long-term fats
- Multi-purpose grease
- Organic grease
- paste
- Special cleaner
- Spray
- White oil
- Cooling lubricants
- Automatic transmission fluid
- cutting oil
Specifications
- DIN 51 524 Teil 2
- DIN 51 517 T.3 (CLP)
- HLP
- DIN 51 524 T.3
- CLP
- DIN 51 825
- AFNOR NF-E 48603
- SEB 181 222
- VDMA 24318
- Vickers M-2950-S
- ASLE 70-1
- ASLE 70-2
- ASLE 70-3
- CETOP RP91H
- Vickers I-286-S3
- David Brown S1.53.101 (E)
- Denison Hydraulics HF-2
- U. S. Steel 126
- U. S. Steel 127
- David Brown S1.53.101
- DIN 51 826
- ISO 12925-1 - CKD
- ISO/DIS 6743-9
- NSF H1
- ANSI/AGMA 9005-E02
- ISO 11158
- DIN 51 517 Teil 2
- AGMA 9005 E02
- AISE 224
- ISO 12925-1 - CKC
- CL
- AIST No. 224
- Danieli Standard n. 0.000.001 Rev.15
- David Brown S1.53.101 (5E)
- ISO 12925-1 CKD
- ISO 6743/3 DAB
- ISO 6743/2 FC (MV 10)
- Morgan Morgoil Revision 1.1-2005
- BS 4231 HSC
- CETOP RP 91 H HL
- DIN 51 502 CGLP
- DIN 51517 T.2 CL
- HLP-D
- ISO-L-CKD
- ASTM D6158
- JCMAS P041 HK
- AIST 126 + 127
- SAE MS1004
- GM LS 2
- Sauer Danfoss 520L0463
- Linde
- ANSI/AGMA 9005-F16
- ISO 11158 HL
- DIN 51524-1 HL
- AFNOR NF E 48600 HL
- CETOP RP 91 HM
- DIN 51 517 T.1 C
- DIN 51 524
- DIN 51506 VCL
- ISO-L-DAB
- AISE 127
- ISO 15380 HEES
- AFNOR NF E 48603 HM
- BS 4231 HSD
- P69 und P70
- DIN 51 825: KP 2 K-30
- DIN 51506-VDL
- ISO 12925-1 CKB
- K 2 K-30
- KPF 2 K-30
- Kosher
- Halal
- ISO 21469
- FDA 21 CFR
- DIN 51 502 – PGLP (CLP-PG)
- ISO 12925-1 CKE/CKT
- Sacmi 200.02.A01
- Loesche
- ISO 12922 HFD-U
- Inline Hydraulik GmbH
- Rexroth RD 90221-01/03
- Hoerbiger Micro fluid
- VII Report of Luxemburg
- European Pharmacopoeia
- Ufficial Italian Pharmacopoeia: X Edition
- USA FDA, 21 CFR 172.878
- USA FDA, 21 CFR 178.3620(a)
- DIN 51 825: KP 3 K-30
- DIN 51 825: KP 1 K-30
- DENISON HF-0
- DIN 51 825 T.3
- DIN 51506
- ETON Vickes I-286-S
- HEES
- ISO 15380
- ISO 6743-9
- KP 2 K-30
- ISO 11158 (HV Flüssigkeit)
- AFNOR NF E 48603 HV
- Stanimuc GA
Applied in
- Agriculture and Forestry
- automatic lubrication devices
- Bearing lubrication on rotary tables
- Central lubrication systems
- Chip chucks in machine tools
- Circular saws, angle grinders
- Food and pharmaceutical industries
- Generators, electric motors, fans, etc
- highly loaded plain and rolling bearings
- Mining, air, sea
- Motor vehicles, construction and agricultural machinery
- Plain and rolling bearings
- Poclain construction machinery
- Power harrows
- Presses for body parts
- Roller lubrication of linear guides on machine tools
- Tapered roller bearings or spherical roller bearings
- transmission
- Wet or dusty environment
Approvals, recommendations
- Alison C-3
- Allison C-4
- ALSTOM HTDG 90117 V0001 X
- Ansaldo Energia 606W807 Rev.C (2012)
- Ansaldo Energia W 3.1-0171-I6000
- ASLE 70-1
- ASLE 70-2
- ASLE 70-3
- ASTM D 4304 Type I
- ATOS Tab. P 002-0/1
- Baier+Köppel (Bekamax)
- Bekamax
- Bosch Rexroth RD 90220
- BS 489:1999
- Caterpillar TO-2
- Caterpillar TO-4
- Caterpillar TO-4M
- CEI 10-8 (1994)
- CETOP PR91H
- CINCINNATI MILACRON P74
- CINCINNATI MILACRON P77
- CNH MAT 3630
- DANA Powershift transmission
- Danieli 0.000.001
- Danieli Standard 0.000.001 Rev. 14 A01.3.1b-Type1
- David Brown S1.53.101
- De Limon Flume
- Denison HF-0
- Denison HF-1
- Denison HF-2
- Deutsche Tecalemit
- DIN 51515-1 TD
- Doosan Skoda Power
- Eaton
- Fives Cincinnati P-68 (ISO 32)
- GE GEK 28143B
- HORBIGER HYDRAULIK
- ISO 4113-CV-AW
- ISO 8068 TSA/TGA
- ITN52220.02
- ITN52220.03
- IVECO 18-1823
- JCB-Standard 2500
- JCB-Standard 4000
- JIS K 2213 -1983 Type II
- Knorr-Bremse N 12006-37
- Komatsu KES 07.868.1
- Krauss Maffei
- LEMO
- Lincoln
- MAN
- MAN 283
- MAN 283 LI-P 00/000
- MAN N 698
- MAN-Norm 283 Li-P 2
- MB 264
- MB 267.0
- Mercedes-Benz
- MIL-L-2104-D
- MIL-L-46452-C
- Mitsubishi Spec. NO. E00-001 Rev.2
- NATO-Code G 421
- Nuovo Pignone SOM 17366
- Rexroth RD 90220-01/12.10
- REXROTH RD 90220-1/11.02
- Romanco Kilian (SH 32)
- Siemens TLV 9013 04
- US Steel 126
- US Steel 127
- Vickers I-286-S3
- Vickers M-2950-S
- Vogel
- VS 15665-OL
- Willy Vogel
- Willy Vogel AG
- ZF TE-ML 03C
- ZF TE-ML 04R
- ZF TE-ML 07F
- ZF TE-ML 12
- TL 9150-0066
- Nato Code G-460
- DTFR 33B120
- Renault 03-80-200 / P, Kategorie 47 - A
- BPW Eco-Li-91
- TL 9150-0075/2
- DTFR 33B100
- Sperry Vickers M2905S & I-280S
- JCB-Standard 2600
- Komatsu Micro Clutch
Grease type
- Aluminum complex soap grease
- Barium complex soap
- Bio grease
- Calcium complex soap grease
- Calcium saponified fat based on mineral oil
- Calcium soap grease
- Flonium grease
- Fluid grease
- Gear fluid grease
- Grease paste
- High temperature grease
- KP 2 R-20
- Lithium calcium soap base
- Lithium complex grease
- Lithium complex soap grease
- Lithium saponified
- Lithium soap grease
- Long-Time grease
- Low temperature grease
- Sodium soap grease
- with MoS2
danger_component
- ethanediol 1
- Hydrocarbons 4
- n-alkanes 3
- Cycloalkanes 3
- Isoalkane 5
- Cyclene 2
- less than 2% aromatics 2
- C6-C7 2
- less than 5% n-hexane 2
- Naphtha (petroleum) 2
- treated with hydrogen, heavy 2
- C14-C18 2
- Aromatics (2-30%) 2
- C10-C13 1
- Distillates (petroleum) 5
- treated with hydrogen, lightweight 2
- Naphthenic acids 1
- zinc salts 1
- 1,2-Benzisothiazol-3(2H)-on 1
- Lubricating oils (petroleum) 2
- white mineral oil (petroleum) 1
- Ethylene glycol 2
- Distillates (petroleum), hydrotreated light paraffinic 1
- 2-amino-2-ethylpropanediol 1
- Polysulfides 1
- Di-tert-dodecyl-Pin-2 1
- Polypropylene glycol 1
- Potassium 2-ethylhexanoate 1
dangers_safety instructions
- P101 19
- P102 34
- P103 5
- P201 1
- P202 1
- P210 10
- P211 9
- P251 9
- P260 8
- P261 8
- P264 34
- P270 4
- P271 4
- P272 1
- P273 52
- P280 52
- P301 + P310 26
- P301 + P312 2
- P301 + P330 + P331 2
- P302 + P352 16
- P303 + P361 + P353 1
- P304 + P340 5
- P305 + P351 + P338 34
- P308 + P313 4
- P310 4
- P312 5
- P321 5
- P330 2
- P331 26
- P332 + P313 11
- P333 + P313 7
- P337 + P313 29
- P362 17
- P391 6
- P403 + P233 2
- P403 + P235 1
- P405 16
- P410 + P412 9
- P501 64
more filters
Wird zur Schmierung von hochbelasteten Gleit- und Wälzlagern in einem Temperaturbereich von -25°C bis +150°C eingesetzt.
* Aluminiumkomplexseifenfett * mechanisch hoch belastbar * wasserbeständig * Kennzeichnung nach DIN 51 825: KP 2 N-20 * Kennzeichnung nach ISO/DIS 6743-9: ISO-L-XBDHB 2
- SKU: 06560-H014
- Shipping weight: 25,00 kg
AUTOL MEHRBEREICHSHYDRAULIKÖL HVI 46 is an especially developed hydraulic oil with a very high viscosity index which contributes to the universal application of the product.
- SKU: 15640
- Shipping weight: 18,00 kg
- Variations in: container size
Divinol Lithogrease 00 is suitable for the lubrication of gears with a high mechanical and thermal load, e.g. circular saws, angle grinders etc. Furthermore, Divinol Lithogrease 00 can also be very well used for the roll lubrication of linear guides of machine tools used e.g. by lubrication systems of Vogel or Baier+Köppel (Bekamax).
- SKU: 20480
- Variations in: container size
Divinol ICL ISO 460 is an industrial gear oil for applications in high charged gears with circular lubrication as well as dipping gears with spur and bevel wheels and worm gears.
- SKU: 21750
- Variations in: container size
Divinol Lithogrease 000 is used for the lubrication of rollers in linear guide systems of machine tools. It can also be used for the lubrication of gears with a high mechanical load.
- SKU: 22320
- Variations in: container size
Divinol ICL ISO 150 is an industrial gear oil for applications in high charged gears with circular lubrication as well as dipping gears with spur and bevel wheels and worm gears.
- SKU: 24630
- Variations in: container size
Divinol ICL ISO 68 is an industrial gear oil for applications in high charged gears with circular lubrication as well as dipping gears with spur and bevel wheels and worm gears.
- SKU: 25030
- Variations in: container size
Divinol ICL ISO 100 is an industrial gear oil for applications in high charged gears with circular lubrication as well as dipping gears with spur and bevel wheels and worm gears.
- SKU: 25040
- Variations in: container size
Divinol ICL ISO 220 is an industrial gear oil for applications in high charged gears with circular lubrication as well as dipping gears with spur and bevel wheels and worm gears.
- SKU: 25060
- Variations in: container size
Divinol ICL ISO 320 is an industrial gear oil for applications in high charged gears with circular lubrication as well as dipping gears with spur and bevel wheels and worm gears.
- SKU: 25070
- Variations in: container size