Filters and sort order
54 Items
under categorie
- Accesories
- Care
- Cleaners and sugar dissolving oils
- Fluid grease
- Gear oil
- Graphite grease
- grease
- Heat transfer oil
- High pressure greases
- High speed greases
- High temperature greases
- Hydraulic oil
- Long-term fats
- Multi-purpose grease
- Organic grease
- paste
- Special cleaner
- Spray
- White oil
- Cooling lubricants
- Automatic transmission fluid
- cutting oil
Specifications
- DIN 51 524 Teil 2
- DIN 51 517 T.3 (CLP)
- HLP
- DIN 51 524 T.3
- CLP
- DIN 51 825
- AFNOR NF-E 48603
- SEB 181 222
- VDMA 24318
- Vickers M-2950-S
- ASLE 70-1
- ASLE 70-2
- ASLE 70-3
- CETOP RP91H
- Vickers I-286-S3
- David Brown S1.53.101 (E)
- Denison Hydraulics HF-2
- U. S. Steel 126
- U. S. Steel 127
- David Brown S1.53.101
- DIN 51 826
- ISO 12925-1 - CKD
- NSF H1
- ANSI/AGMA 9005-E02
- ISO 11158
- DIN 51 517 Teil 2
- AGMA 9005 E02
- AISE 224
- ISO 12925-1 - CKC
- CL
- AIST No. 224
- Danieli Standard n. 0.000.001 Rev.15
- David Brown S1.53.101 (5E)
- DIN 51 502 CGLP
- ISO 12925-1 CKD
- ISO/DIS 6743-9
- ISO 6743/3 DAB
- ISO 6743/2 FC (MV 10)
- Morgan Morgoil Revision 1.1-2005
- BS 4231 HSC
- CETOP RP 91 H HL
- DIN 51 524
- DIN 51517 T.2 CL
- HLP-D
- ISO-L-CKD
- ASTM D6158
- JCMAS P041 HK
- AIST 126 + 127
- SAE MS1004
- GM LS 2
- Sauer Danfoss 520L0463
- Linde
- ISO 15380 HEES
- ANSI/AGMA 9005-F16
- ISO 11158 HL
- DIN 51524-1 HL
- AFNOR NF E 48600 HL
- CETOP RP 91 HM
- DIN 51 517 T.1 C
- DIN 51506 VCL
- ISO-L-DAB
- AISE 127
- AFNOR NF E 48603 HM
- BS 4231 HSD
- P69 und P70
- DIN 51 825: KP 2 K-30
- DIN 51506-VDL
- ISO 12925-1 CKB
- K 2 K-30
- KPF 2 K-30
- Kosher
- Halal
- ISO 21469
- FDA 21 CFR
- DIN 51 502 – PGLP (CLP-PG)
- ISO 12925-1 CKE/CKT
- Sacmi 200.02.A01
- Loesche
- ISO 12922 HFD-U
- Inline Hydraulik GmbH
- Rexroth RD 90221-01/03
- Hoerbiger Micro fluid
- VII Report of Luxemburg
- European Pharmacopoeia
- Ufficial Italian Pharmacopoeia: X Edition
- USA FDA, 21 CFR 172.878
- USA FDA, 21 CFR 178.3620(a)
- DIN 51 825: KP 3 K-30
- DIN 51 825: KP 1 K-30
- DENISON HF-0
- DIN 51 825 T.3
- DIN 51506
- ETON Vickes I-286-S
- HEES
- ISO 15380
- ISO 6743-9
- KP 2 K-30
- ISO 11158 (HV Flüssigkeit)
- AFNOR NF E 48603 HV
- Stanimuc GA
Applied in
- Agriculture and Forestry
- automatic lubrication devices
- Bearing lubrication on rotary tables
- Central lubrication systems
- Chip chucks in machine tools
- Circular saws, angle grinders
- Food and pharmaceutical industries
- Generators, electric motors, fans, etc
- highly loaded plain and rolling bearings
- Mining, air, sea
- Motor vehicles, construction and agricultural machinery
- Plain and rolling bearings
- Poclain construction machinery
- Power harrows
- Presses for body parts
- Roller lubrication of linear guides on machine tools
- Tapered roller bearings or spherical roller bearings
- transmission
- Wet or dusty environment
Approvals, recommendations
- ATOS Tab. P 002-0/1
- Caterpillar TO-4
- HORBIGER HYDRAULIK
- REXROTH RD 90220-1/11.02
- ZF TE-ML 12
- Allison C-4
- DANA Powershift transmission
- ZF TE-ML 03C
- Willy Vogel AG
- Ansaldo Energia 606W807 Rev.C (2012)
- ASTM D 4304 Type I
- BS 489:1999
- Caterpillar TO-2
- CEI 10-8 (1994)
- Danieli 0.000.001
- Denison HF-2
- DIN 51515-1 TD
- Doosan Skoda Power
- Eaton
- GE GEK 28143B
- ISO 8068 TSA/TGA
- ITN52220.02
- JCB-Standard 4000
- JIS K 2213 -1983 Type II
- Komatsu KES 07.868.1
- LEMO
- Lincoln
- MB 264
- Mitsubishi Spec. NO. E00-001 Rev.2
- Nuovo Pignone SOM 17366
- Rexroth RD 90220-01/12.10
- Siemens TLV 9013 04
- ZF TE-ML 07F
- Sperry Vickers M2905S & I-280S
- Komatsu Micro Clutch
- Alison C-3
- ALSTOM HTDG 90117 V0001 X
- Ansaldo Energia W 3.1-0171-I6000
- ASLE 70-1
- ASLE 70-2
- ASLE 70-3
- Audi P/N G002000 / VW TL 52146
- Audi P/N G002012
- Baier+Köppel (Bekamax)
- Bekamax
- Bosch Rexroth RD 90220
- Caterpillar TO-4M
- CETOP PR91H
- Chrysler MS-10838, P/N 05142893AA
- Chrysler MS-1872
- Chrysler MS-5931, P/N 04883077
- Chrysler MS-9602, ATF+4
- CINCINNATI MILACRON P74
- CINCINNATI MILACRON P77
- CNH MAT 3630
- Danieli Standard 0.000.001 Rev. 14 A01.3.1b-Type1
- David Brown S1.53.101
- De Limon Flume
- Denison HF-0
- Denison HF-1
- Deutsche Tecalemit
- Fives Cincinnati P-68 (ISO 32)
- Ford M2C195-A
- Ford M2C204-A (extended temp range)
- GM 9985010, P/N 1052884
- GM 9985835, P/N 12345866 (cold climate)
- GM P/N 89021184
- Hyundai / Kia PSF-3
- Hyundai / Kia PSF-4
- ISO 4113-CV-AW
- ITN52220.03
- IVECO 18-1823
- JCB-Standard 2500
- Knorr-Bremse N 12006-37
- Krauss Maffei
- MAN
- MAN 283
- MAN 283 LI-P 00/000
- MAN M 3289
- MAN N 698
- MAN-Norm 283 Li-P 2
- MB 267.0
- Mercedes-Benz
- MIL-L-2104-D
- MIL-L-46452-C
- Mitsubishi Diamond SP III
- Mitsubishi PS Fluid
- NATO-Code G 421
- Nissan PSF-II
- Pentosin CHF 11S
- Pentosin CHF 202
- Pentosin CHF 7.1
- Romanco Kilian (SH 32)
- Saab P/N (45) 30 09 800
- Saab P/N 30 32 380
- Subaru P/N K0209A0080
- Toyota PSF Type EH, P/N 008886-01
- US Steel 126
- US Steel 127
- Vickers I-286-S3
Grease type
- Aluminum complex soap grease
- Barium complex soap
- Bio grease
- Calcium complex soap grease
- Calcium saponified fat based on mineral oil
- Calcium soap grease
- Flonium grease
- Fluid grease
- Gear fluid grease
- Grease paste
- High temperature grease
- Lithium calcium soap base
- Lithium complex grease
- Lithium complex soap grease
- Lithium saponified
- Lithium soap grease
- Long-Time grease
- Low temperature grease
- Sodium soap grease
- with MoS2
danger_component
- ethanediol 1
- Hydrocarbons 4
- n-alkanes 3
- Cycloalkanes 3
- Isoalkane 5
- Cyclene 2
- less than 2% aromatics 2
- C6-C7 2
- less than 5% n-hexane 2
- Naphtha (petroleum) 2
- treated with hydrogen, heavy 2
- C14-C18 2
- Aromatics (2-30%) 2
- C10-C13 1
- Distillates (petroleum) 5
- treated with hydrogen, lightweight 2
- Naphthenic acids 1
- zinc salts 1
- 1,2-Benzisothiazol-3(2H)-on 1
- Lubricating oils (petroleum) 2
- white mineral oil (petroleum) 1
- Ethylene glycol 2
- Distillates (petroleum), hydrotreated light paraffinic 1
- 2-amino-2-ethylpropanediol 1
- Polysulfides 1
- Di-tert-dodecyl-Pin-2 1
- Polypropylene glycol 1
- Potassium 2-ethylhexanoate 1
dangers_safety instructions
- P101 19
- P102 39
- P103 5
- P201 1
- P202 1
- P210 10
- P211 9
- P251 9
- P260 8
- P261 9
- P264 33
- P270 4
- P271 4
- P272 2
- P273 52
- P280 53
- P301 + P310 27
- P301 + P312 2
- P301 + P330 + P331 2
- P302 + P352 18
- P303 + P361 + P353 1
- P304 + P340 5
- P305 + P351 + P338 35
- P308 + P313 3
- P310 4
- P312 5
- P321 5
- P330 2
- P331 27
- P332 + P313 12
- P333 + P313 8
- P337 + P313 30
- P362 18
- P391 6
- P403 + P233 2
- P403 + P235 1
- P405 16
- P410 + P412 9
- P501 64
more filters
Divinol Mehrzweckfett Graphitiert is suitable for the lubrication of slide and roller bearings, also for those with comparatively high sliding friction in all kinds of motor vehicles.
- SKU: 85000
- Variations in: container size
Divinol Fett Fibrous 2 is suitable for long-term lubrication in highly charged slide and roller bearings of diggers, track rod joints, cardan cross joints, brake cam shafts at motor vehicles and guidances of lifting devices.
- SKU: 96840
- Variations in: container size
Divinol Fett L 3 is used for the lubrication of slide and roller bearings even with a quite high part of sliding friction. It is especially suitable for the lubrication of transport rollers and wheels.
- SKU: 85560
- Variations in: container size
Divinol HLP ISO 46 is used for all hydraulic aggregates, for which the usage of HLP alloyed oils is prescribed.
- SKU: 48870
- Variations in: container size
Divinol Lithogrease 000 is used for the lubrication of rollers in linear guide systems of machine tools. It can also be used for the lubrication of gears with a high mechanical load.
- SKU: 22320
- Variations in: container size
Divinol Lithogrease 00 is suitable for the lubrication of gears with a high mechanical and thermal load, e.g. circular saws, angle grinders etc. Furthermore, Divinol Lithogrease 00 can also be very well used for the roll lubrication of linear guides of machine tools used e.g. by lubrication systems of Vogel or Baier+Köppel (Bekamax).
- SKU: 20480
- Variations in: container size
Divinol Fett L 800 is used for bearing lubrication of swivel rotary tables in machining centres. Stick-slipeffects are reliably avoided due to high base oil viscosity.
- SKU: 26490
- Variations in: container size
Divinol HLP ISO 68 FF can be used for all hydraulic aggregates, for which the usage of fine filtered HLP alloyed oils is prescribed.
- SKU: 23320-K013
- Shipping weight: 4,65 kg
eni OSO is trademark of a line of high-quality hydraulic oils based on mineral oils for the application in all types of hydraulic applications. The oils are formulated from selected paraffinic base stocks treated with low zinc technology and agents against corrosion, oil ageing, wear and stability against hydrolysis.
- SKU: 6386
- Shipping weight: 18,00 kg
Detergierendes Hydrauliköl auf paraffinischer Mineralölbasis mit einem wirksamen
zinkhaltigen Additivpaket gegen Korrosion, Ölalterung und Verschleiß (ohne demulgierende
Eigenschaften).
- SKU: 601V
- Variations in: Size